Back to the top

USER MANUAL Learn how to use your product ⎟ Download the manual in all languages ▼

The SuperTooth® Melody is a Bluetooth® A2DP stereo headset. You can listen to music from a compatible phone, tablet, computer, laptop or music player. You can also make and answer calls hands-free with your compatible mobile phone. You can use the headset with compatible devices that support Bluetooth® A2DP wireless technology. To use the headset, place it over your head with the pad indicated with L on the left ear and the pad with R on the right ear. Adjust the headband length so that the speaker pads rest comfortably.

Compact size - Adjustable

Functions

Charge the battery

When the battery is discharged, the headset beeps about every minute, and the Bluetooth indicator (10) flashes red.

To charge the headset:
1. Connect the USB cable to your computer or to a USB charger.
2. Connect the USB cable to the charger connector (2).
The charge indicator (1) flashes steady red while charging.
3. When the battery is fully charged, the charge indicator (1) flashes
steady green. Disconnect the cable from the headset.

The fully charged battery has power for up to 7 hours and 30 minutes of talk time, up to 90 hours of standby time, or up to 7 hours and 30 minutes of music playing time.

Warning:
1. Attention should be drawn to the environment aspects of battery disposal.
2. Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine or fire.

Switch on
To switch on, press and hold the multifunction (7) button about 4 seconds. The headset beeps, and the Bluetooth indicator (10) flashes green.
When the headset tries to connect to the last used phone or music player, the Bluetooth indicator (10) blinks green slowly. When the headset is connected to a device and is ready to use, the Bluetooth indicator (10) blinks blue slowly. If the headset has not been paired with a device, it automatically enters in pairing mode.

Switch off
To switch off, press and hold the multifunction (7) button for about 4 seconds. The headset beeps, and the Bluetooth indicator (10) flashes red. If the headset is not connected to a device within 10 minutes, it switches off automatically.

Pairing
1. Please make sure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired with a device, switch on the headset. The headset enters in pairing mode, and the
Bluetooth indicator (10) blinks blue quickly.
To pair the headset if it has been previously paired with another device, make sure that the headset is switched off, and press and hold the
multifunction (7) button (for about 6 seconds) until the Bluetooth indicator (10) blinks blue quickly.
3. Activate the Bluetooth feature on your phone or music player, and set it to search for Bluetooth devices.
4. Select "STMELODY" from the list of found devices on your phone or music player.
5. If necessary, enter the passcode 0000 to pair and connect the headset to your device.
6. The Bluetooth indicator (10) blinks blue slowly. The headset is ready to use.

Disconnect the headset
To disconnect the headset from your device, switch off the headset, or disconnect it in the Bluetooth menu of your device.

Reconnect the headset
To connect the headset to the device that you have last used with it, switch on the headset and it will reconnect automatically. If it doesn’t, enable connection in the Bluetooth menu of your device.

Adjust the volume
To adjust the headset volume, press the volume up (5) or down (4) button during a call or while listening to music. To adjust the volume quickly, press and hold either button.

Warning: Excessive sound pressure from earphones and headphones can cause hearing loss.

Calls
To make a call, dial the phone number on your phone keypad.
To redial the number you last called (if your phone supports this feature with the headset), when no call is in progress, short press the multifunction (7) button.
To activate voice dialling (if your phone supports this feature with the headset), when no call is in progress, press the multifunction (7) button twice quickly until the phone starts voice dialling, and process as described in the phone user guide.
To answer or end a call, short press the multifunction (7) button or use the phone buttons.
To reject a call, press and hold the multifunction (7) button for about 2 seconds.
To mute or unmute the microphone during a call, press the play / pause (8) button.
To switch a call from the headset to the connected phone, press and hold the multifunction (7) button for about 2 seconds.
To switch the call from the phone to the headset, press and hold the multifunction (7) button for about 2 seconds.

Listen to music
To listen to music, connect the headset to compatible music player that supports the A2DP Bluetooth profile.
The available music functions depend on your music player.
If you receive or make a call while listening to music, the music is paused until you end the call.
To play a track, select it in the music player, and press the play / pause (8) button.
To pause or resume playing, press the play / pause (8) button.
To stop playing, press the play / pause (8) button twice quickly.
To select the next track during playing, press the forward (9) button once.
To select the previous track, press the rewind (6) button once.
To scroll through the current track quickly, press and hold either button.

Clear settings or reset
To clear the pairing settings from the headset, switch off the headset, and press and hold the multifunction (7) button and the volume down (4) button (for over 8 seconds) until the Bluetooth indicator flashes red, green and blue three times.
To hardware reset the headset, connect the headset to a charger or plug it on a computer, and press both the multifunction (7) button and the volume up (5) button.

Back to the top

WARRANTY REGISTRATION Complete this form to register your 2- year warranty.